Product Characteristics 

1. Taikan two lines and one boxway machining center T-850L the machine covers a small area, humanized design ,850 and 1050 for the rear chip design, both sides of the automatic screw row, reduce manual cleaning time.

2. Tool changing speed 2 Sec, tool storehouse capacity 24, tool changing device is upgraded again, use high speed hydraulic knife beating, achieve steady and fast effect.

3. The three-axis servo motor is 3 KW, inertia increase, good acceleration and dynamic performance can be obtained.

4. Spindle motor 11 KW, can be up to 15 instantaneous cutting force.

5. Standard matching leather lead 8000 r/min, optional 10000 r/min, cutting efficiency, belt drive, avoid motor overheating, reduce spindle thermal deformation.

6. Choose the straight head 10000 r/min,12000r/min or 15000 r/min, with oil cooler to improve machining accuracy and surface finish.

7. The front end of the spindle adopts labyrinth design, with blowing way to prevent cutting fluid from entering the spindle bearing.

8. Equipped with a volumetric and forced lubricating oil system, to ensure that all moving parts of the machine lubrication.

9. Machine tool base columns are made of good cast iron, reheat treatment, symmetrical structure design, reduce machine tool distortion, improve machine tool precision stability.

10. Select the central outlet of the leather-lead spindle, and the cutting fluid is output from the front end of the tool center to ensure the removal of debris during deep hole machining, increase the machining speed and prolong the tool life.

11. Two-wire and one-hard machining center T-850L optional BT40 gear head spindle, divided into high and low gear, low gear can output 500 Nm of cutting force, high-grade, speed up to 6000 r/min, high processing efficiency and precision.

12. System standard FANUC Oi-F matching Mitsubishi M80B.


Application Area 

Suitable for mechanical manufacturing, mould manufacturing and other industries processing, especially automobile manufacturing and motorcycle manufacturing.


Machining Workpiece

Product Parameters 

Suitable for mechanical manufacturing, mould manufacturing and other industries processing, especially automobile manufacturing and motorcycle manufacturing.
 

ItemSpecificationUnitT-850L
Working TableWorking table size(LXM)mm950 X 500
Max. Loadingkg600
Working table heightmm920
T-slot(qty-width*distance)mm18 X 5 X 100
SpindleSpindle nose end#7/24 Taper No.40
Spindle speedrpm8000
TravelX/Y/Z travelmm850/500/530
Distance from spindle nose to working tablemm100-630
TraverseX/Y/Z traverse ratem/min36/36/20
cutting speedmm/min1-10000
PrecisionPositioning accuracy/300mm0.008
Repeat accuracy/300mm0.005
ATCKnife shank specification#BT40
Props capacitypc24
Max Diametermmφ75
Max Diameter(no adjacent knifemmφ150
Max tool lengthmm250
Max tool weightkg8
Power of MotorSpindle motor(50%ED)kw11
X/Y/Z servo motor kw3.0/3.0/3.0
Cutter motorkw0.1
Machine Tool SizeMachine protection form#Full cover
L*W*Hmm2860 X 2100 X 2800
Weight of machinekg6000