T-12 Vertical Machining Center

T-12 Vertical Machining Center

T-12 vertical machining center, X, Y, Z axis guide rail adopts hardened and ground cast iron guide rail to PTFE plastic veneer.

Get a quote

Product Characteristics 

T-12 vertical machining center, X, Y, Z axis guide rail adopts hardened and ground cast iron guide rail to PTFE plastic veneer. Its characteristics are: small friction coefficient, good shock absorption, low speed without crawling, high rapid positioning accuracy, large contact surface, and strong load-bearing capacity. The main drive adopts a motor-synchronous toothed belt-spindle transmission mode, which enables the spindle to obtain a higher speed and greatly reduces the vibration and noise of the spindle box, which is more conducive to high-speed and high-precision processing. This type of machine tool is widely used in machinery manufacturing, mold manufacturing and other industries to process complex parts such as plates, disks, and shells. The workpiece can be automatically and continuously processed by milling, drilling, boring, expanding, reaming, countersinking, tapping and other processes after one clamping, which is suitable for mass production.

  • The structure of the whole machine is fixed-column and cross sliding table structure. The Y-axis of the machine adopts a four-rail design, which can ensure the heavy load capacity during processing and ensure the processing accuracy.
  • The large basic parts are molded with resin sand and cast with high-strength cast iron materials, which enables the machine tool to obtain high rigidity and stable precision.
  •  X, Y, Z axis adopts rectangular hard rail, high rigidity, heavy cutting, good shock absorption.
  • The spindle adopts Taikan's high speed spindle unit with belt drive BT50-6000rpm spindle as standard, which has high cutting efficiency and can reduce the heat deformation of the spindle.
  • The movement of the headstock (Z axis) is equipped with a counterweight device with a central guide design. Even when moving at a high speed, the counterweight will not shake. The precise ratio of the counterweight to the weight of the spindle box can obtain the best processing characteristics, and the Z-axis drive motor has good load characteristics.
  • The cutting fluid has a large capacity, which can quickly discharge the cutting heat. The front chip removal design is adopted, and the water tank adopts a double tank type and is placed inside the machine to save space.
  • Equipped with a high-performance Mitsubishi M80A CNC system, which ensures the stability of machine tool control, as well as the CNC machining functions and auxiliary functions required by users.


Working Environment

(1) Three-phase AC power supply :380 V±5%;50 HzV±1 Hz, main power line 8 mm² or larger, ground wire 8 or larger.
(2) Ambient temperature :8~40 Cº.
(3) Relative humidity :≤80 per cent.
(4) Keep away from light source, vibration source and heat source, keep away from high frequency generator, discharge motive, welding machine, etc., avoid electrical interference to make machine tool NC system malfunction.


Product Parameters 

Items Unit T-12
Processing Travel size(X-axis) mm 1200
Travel size(Y-axis) mm 700
Travel size(Z axis) mm 600
Distance from spindle nose to table mm 150~750
Spindle center mm 785
Work table Work table size mm 1360*700
Max.load Kg 1000
T-slot (number-width * spacing) mm 5-18*152.5
Spindle Motor power (rated/short time) kw 11/15
Rotational speed range r/min 50~6000(Belt)
Spindle diameter   φ155
Toolholder specifications   BT50
Spigot specifications   P50T-I(MAS403)
Guide Rail X-axis   Rectangular guide rails
Y-axis   Rectangular guide rails
Z-axis   Rectangular guide rails
Drive Ball screw X/Y/Z mm 50*10
Motor power X/Y/Z kw 3.0/3.0/3.0
Speed Cutting feed speed range mm/min 1-10000
X, Y, Z axis fast moving speed m/min 41255
Machine accuracy Positioning accuracy (X/Y/Z) mm 0.015
Repeat positioning accuracy (X/Y/Z) mm 0.008
Tool Storage(optional) Tool capacity /
Tool weight  kg /
Tool length mm /
Maximum diameter (Full knife/adjacent empty knife) mm /
the others Control system   Mitsubishi M80A
Air Source Flow L/min 280(ANR)
Air pressure MPa 0.6~0.8
Equipment capacity KVA 35
Cooling tank capacity L 350
Machine dimensions (L*W*H) mm 3650*3020*2900
Machine weight (approx.) Kg 9500

Company Profile

vertical machining center

Certificate Display




Why Choose Us

1. A professional manufacturer of machine tools and automation products.

2. Three production bases: Shenzhen, Suzhou and Yibin, ensuring a monthly production capacity of 2,000 units.

3. A high-tech listed company.

4. A professional R & D team of 500 talents.

5. Series of products with stable performance such as CNC lathes, turning and milling machine tools, vertical machining centers, horizontal machining centers, gantry machining centers, centering machines and so on.

6. A professional global  technical service team.

7. A stable supply chain system.

     After years of development, we has become the leading intelligent equipment manufacturing enterprises in China. The company is headquartered in Bao’an District, Shenzhen City, with three modern production bases, with a factory building area of more than 100000 square meters ,2000 employees, and more than 1800 machines per month. As a national high-tech enterprise, the company has a professional R & D team, products with independent intellectual property rights.

     Looking forward to the future, the company will carry forward the spirit of "we have always worked hard to be better".