T-15 vertical machining center, X, Y, Z axis guide rail adopts hardened and ground cast iron guide rail to PTFE plastic veneer. Its characteristics are: small friction coefficient, good shock absorption, low speed without crawling, high rapid positioning accuracy, large contact surface, and strong load-bearing capacity. The main drive adopts a motor-synchronous toothed belt-spindle transmission mode, which enables the spindle to obtain a higher speed and greatly reduces the vibration and noise of the spindle box, which is more conducive to high-speed and high-precision processing. This type of machine tool is widely used in machinery manufacturing, mold manufacturing and other industries to process complex parts such as plates, disks, and shells. The workpiece can be automatically and continuously processed by milling, drilling, boring, expanding, reaming, countersinking, tapping and other processes after one clamping, which is suitable for mass production.
(1) Three-phase AC power supply :380 V±5%;50 HzV±1 Hz, main power line 8 mm² or larger, ground wire 8 or larger.
(2) Ambient temperature :8~40 Cº.
(3) Relative humidity :≤80 per cent.
(4) Keep away from light source, vibration source and heat source, keep away from high frequency generator, discharge motive, welding machine, etc., avoid electrical interference to make machine tool NC system malfunction.
|Travel size(Z axis)||mm||700|
|Distance from spindle nose to table||mm||170～870|
|Work table||Work table size||mm||1700*800|
|T-slot (number-width * spacing)||mm||5-22*135|
|Spindle||Motor power (rated/short time)||kw||15/18.5|
|Rotational speed range||r/min||50～6000(Belt）|
|Guide Rail||X-axis||Rectangular guide rails|
|Y-axis||Rectangular guide rails|
|Z-axis||Rectangular guide rails|
|Drive||Ball screw X/Y/Z||mm||63*10/63*10/50*10|
|Motor power X/Y/Z||kw||4.5/4.5/4.5|
|Speed||Cutting feed speed range||mm/min||1-10000|
|X, Y, Z axis fast moving speed||m/min||41255|
|Machine accuracy||Positioning accuracy (X/Y/Z)||mm||0.02|
|Repeat positioning accuracy (X/Y/Z)||mm||0.01|
|Tool Storage(optional)||Tool capacity||把||/|
|Maximum diameter (Full knife/adjacent empty knife)||mm||/|
|the others||Control system||Mitsubishi M80A|
|Cooling tank capacity||L||350|
|Machine dimensions (L*W*H)||mm||4370*3200*3500|
|Machine weight (approx.)||Kg||13000|
Why Choose Us