FAQ Category

04 - FAQ About T-H Cross-Slide Series

  • Q How does single-clamping multi-face processing improve efficiency and precision for 3C components?

    A With a rotary worktable and workpieces up to 1.3 meters long, the T-H Series performs multi-face, multi-process machining in one setup. This eliminates repeated clamping errors, improves overall accuracy, reduces fixture costs, and uses gravity for superior chip evacuation.
  • Q What machine architecture ensures vibration-free cutting during high-speed processing?

    A The T-H Series adopts a fixed-column cross-slide structure built on high-strength resin-sand iron castings. Featuring an ultra-wide base and a high-rigidity herringbone column, the machine effectively absorbs cutting vibration and prevents deformation during high-speed machining.
  • Q What spindle specifications are used, and how is the spindle protected from coolant contamination?

    A The machine features a high-speed BT40 12,000 rpm direct-drive spindle unit. The spindle nose incorporates a labyrinth design paired with an active air curtain protection system, preventing coolant and cutting chips from penetrating the spindle bearings to ensure extended service life.
  • Q How does the T-H Series achieve high dynamic precision and axial rigidity?

    A All three axes are fitted with heavy-duty size-45 linear roller guideways for high rigidity, low friction, and quiet operation. Large-diameter C3-grade pre-tensioned ball screws compensate for thermal growth, supported by self-lubricating bearings and a forced volumetric lubrication system.
  • Q How are chip disposal and coolant filtration managed during intensive 3C cavity production?

    A The T-H Series comes standard with dual-side rear-slope chip flushing and a rear-placed dual-layer filtration coolant tank. This layout provides fast chip discharge, high fluid recovery efficiency, and clean cutting fluid supply for uninterrupted high-volume production.
  • Q Which CNC system controls the T-H Series, and what operational features are included?

    A Powered by a high-performance FANUC CNC system, the T-H Series guarantees outstanding control stability, fast response, and comprehensive auxiliary CNC functions. Paired with a reliable 24-tool arm-type magazine and fully enclosed safety guarding, it provides an optimal blend of operator safety, easy maintenance, and high uptime.

Service

About Taikan

Contact Us

 Telephone: +86-755-2996-5778
 Email: overseas-marketing@szccm.com
 WhatsApp: +86-136-3293-4745
Copyright © Taikan Machine All Rights Reserved.