FAQ Category

01 - FAQ About DT Series Vertical Machining Centers

  • Q What applications are the Taikan HDT-50 and HDT-55 vertical machining centers designed for?

    A The HDT-50 and HDT-55 are designed for high-productivity milling where rigidity, precision, and long-cycle stability are critical. Their large worktables, high-speed direct-drive spindles, and rigid machine structure make them suitable for precision production parts, structural components, dies, and other demanding machining applications.
  • Q How does the DT Series achieve high rigidity and stable machining performance?

    A The machines use an inverted T-type bed, double-wall saddle, double-wall headstock, and high-rigidity roller linear guideways to improve load distribution and vibration resistance. FEM-based structural optimization and the oversized base design further support stable cutting performance during continuous and heavy-duty machining.
  • Q How do the hollow-cooled ball screws improve machining accuracy?

    A The hollow ball screw cooling system controls thermal buildup inside the ball screw, reducing thermal elongation during extended operation. This helps maintain positioning accuracy and dimensional consistency while minimizing warm-up effects, making the machine better suited to long-cycle precision machining.
  • Q What spindle options are available for the Taikan DT Series?

    A The standard configuration uses a 12,000 rpm BBT40 direct-drive spindle with 11/22 kW output and 53/106 N·m torque. Depending on the machining requirement, the HDT-50 and HDT-55 can also be configured with 15,000 rpm BBT40 or 20,000 rpm HSK-A63 motorized spindles for higher-speed cutting and improved surface finish.
  • Q What are the advantages of the BBT40 dual-contact spindle system?

    A The BBT dual-contact interface provides contact on both the taper and flange surfaces, increasing spindle-tool rigidity and reducing tool-holder movement during cutting. This improves machining stability, dimensional accuracy, tool life, ATC repeatability, and surface quality, particularly under high-speed or higher-load cutting conditions.
  • Q How does the DT Series improve machining productivity?

    A The HDT Series combines 30-tool magazine capacity, 1.2-second tool-to-tool change time, 48/48/48 m/min rapid traverse, and efficient chip removal to reduce non-cutting time. High-speed spindle options and a rigid cutting structure further support shorter cycle times without sacrificing machining stability.
  • Q What options are available for higher precision and automated production?

    A The HDT Series supports configurations such as 3-axis linear scales, tool setters, probes, through-spindle coolant, automatic doors, chip conveyors, oil-mist collectors, and enhanced cooling systems. These options allow the machine to be configured for applications requiring tighter process control, automated tool management, improved chip evacuation, and higher production efficiency.

Service

About Taikan

Contact Us

 Telephone: +86-755-2996-5778
 Email: overseas-marketing@szccm.com
 WhatsApp: +86-136-3293-4745
Copyright © Taikan Machine All Rights Reserved.